Labeling, gluing, fixing

The semi-automatic gluing systems proposed by Imballaggi PK (Vigevano PV) are a suitable solution for gluing small runs of paper, board or paper material labels: solid and durable, all strictly “made in Italy”, guaranteeing maximum versatility of use.

The EME series. EME series gluing systems, which use cold or vinyl glues, are suitable for manually applying labels on any type of material. In particular, the EME 180 is often used to apply state seals, while the EME 230 AN, electric and semi-automatic, is used for gluing paper labels. The latter consists in a drive component below (motor housing box) and an upper part for gluing labels (glue tub). The labels are positioned on a special inclined plane that functions as a loader, then serrated with rubberized plates.
The left switch starts the gluing cylinder, while the pedal activates a rubberized roller that draws the labels which, passing one by one beneath an entry shaft, come into contact with the gluing cylinder, which draws them, preparing them for the operator with a uniformly spread adhesive layer, ready for application.
Also in the same series is the semi-automatic labeler for cylindrical objects BTL 210, suitable for labeling with cold glue bottles, jars and cylindrical objects generally, whether glass, tin plate or plastic. Suited for the wine, chemical and preservative sectors, by laying the container to be labeled horizontally on two pedal-operated rollers, the machine automatically executes the labeling cycle, which can also execute wraparound labels.

Glue dots. It’s worth keeping in mind that Imballaggi Pk also proposes its original removable Glue Dots, a multi-use instantaneous gluing system that requires no heat-up time. The dots are non-toxic, emitting no gases, and do not burn. They are available in three degrees of adhesiveness (low tack, high tack, super high tack); they are easy to use and require no equipment because they are sold in convenient dispenser boxes.
 

Our network